Installation guide

Radiator reflector panel installation guide

Installing radiator reflector panels in your home is a simple DIY job that will take around 5 minutes per panel.

It is worth taking your time while installing your first reflector panel.

Step 1

Measure the length and width of your radiator.

Step 2

Cut the panels to size. Make sure you leave a 5 cm gap from the top and sides of your radiator so the reflector panels stay hidden.

We recommend using a sharp Stanley knife or scissors to cut the panels to size.

Step 3

Now add the tape to the back of the reflector panels.

The tape we supply is incredibly strong and effective in 95% of homes, however occationally you may require glue for some walls (we recommend no more nails).

Step 4

Secure panels behind the radiator. Using the tape they simply stick behind the radiator, just apply a small amount of pressure.

You should not remove your radiator for this, they will slide easily behind it.

All finished

Your reflector panels should now be installed and hidden behind your radiator. Now you can  turn down your heating and still enjoy a warmer house.

Buy now – View our range of panels